MIMAKI SWJ-320 S4 - Page 92

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.22 P.3
4.2.22 CHARGE INK
R.1.0
1
2
3
4
5
6
7
8
2. Select [CLEAR].
3. [][] By pressing[]/[] key, select a color of which you
clear the charge ink information. When you clear charge ink
information of all colors, select “ALL”.
4. If you want to clear charge ink information inside the main
body, select “YES”.
5. When you select “YES”, charge ink information inside the main
body is cleared and writing to the memory starts.
6. Press [ENTER].
CHARGEINK
CLEAR [ENT]
SELECTCOLOR
:BLACK
SELECTCOLOR
:NONE
 If the charge ink information registered in the main
body is less than 1cc, it is not displayed for
“SELECT COLOR”.
 If charge ink information of all colors are less than
1cc, “NONE” is displayed.
CLEAROK?
NO<>YES
**WRITING**
DONOTREMOVEINKIC
COMPLETED
[ENT]
 Do not turn off the power supply during writing.
MAINTENANCE MANUAL > Adjustment > Adjustment Items > CHARGE INK
Model SWJ-320S Issued 2012.12.14 Revised F/W ver 2.10 Remark
1.0
Rev.