Mindray DC-8 EXP Service Manual

I
Revision History
Mindray may revise this publication from time to time without written notice.
Revision
Date
Reason for Change
1.0
2011.11.25
Initial release
2.0
2012.2.27
1. Modify the content of “12 Preventive Maintenance” and let it more
practical.
2. Increase detailed picture and description of “6.2.1.2 Operation System
and Doppler restoration”.
3. In chapter “8 Field replaceable Unit”, replace the picture of hard disk and
change the name of “Control Panel Assembly” into “Top Cover of Keyboard
Assembly”.
4. Delete the “Reserved” description of audio and video in “1.2.3 General
Symbols”.
5. Modify several clerical errors in the initial release.
3.0
2012.4.11
1. Modify the requirement of maintenance operator in“5.1”and“12.3.5”.
2. Increase the up/down dragline adjustment method in “7.5”.
3. Increase the disassembling and assembling method of gas spring
assembly in 9.3.12.4.
4.0
2012.11.30
1. Increase the note “Calibrate the touch screen after the system software is
upgraded or recovered” in 7.2.2.
2. Increase 9.3.12.5 the disassembling and assembling method of monitor
support arm.
3. Increase C.1.21~C.1.46 self test items in Appendix C.
5.0
2013.03.12
Monitor replacement
1. Modify “4.6 Fig 4-21 Main Monitor Unit” schematic diagram.
2. Modify procedure description in 7.1.2
3. Modify monitor assembly procedure 9.3.10
6.0
2013.04.11
1. Modify installing notification for 4D mode in chapter 10.2.2（4D option
does not require DSP board since 02.00.00 version）；
2. Add 2.1.3 printer model（MITSUBISHI P95DW-N, Canon selphy CP800）；
3. Modify 2.1.3 footswitch model description
4. Add Appendix C.1.1 item；
5. Add Restore package checking tool 6.2.3
6. Add pencil probe cable installing method 10.2.1
7. Change HDD FRU part number (old number is to be used for SFDA
region only, add CE/FDA region number)
7.0
2013.08.20
1. Self-diagnosis test description modification
2. Chapter 10.2, 9.3.2 ECG module photo update
3. Change 11.2 windows startup picture.
8.0
2014.1.15
Add the order number and disassembly of monitor’s front cover.
9.0
2014.9.12
1. Add DC-8 EXP control panel figure in 2.1.2.4;
2. Add FRU of PC module assembly, digital board assembly, COM
module, keyboard and top cover assembly, control panel top cover

Mindray DC-8 EXP Specifications

General

Brand	Mindray
Model	DC-8 EXP
Category	Medical Equipment
Language	English