Mindray DC-8 EXP Service Manual

System Installation 3-9
2. Function setting: for details, please refer to “3.5.3 System Preset”.
3.4.2 Installing a Graph / Laser Printer
The graph / laser printer is connected to the system via the USB port on system. As shown in the
figure below, a graph / laser printer has a power cord and a data cable.
1. Connect the data cable with the USB port on the system.
2. Connect the power cord to an appropriate power supply.
3. Printers listed in this manual (referring to 2.1.3) have drivers installed already.
3.4.3 Installing Video Printer
The system support both black/white video printers (analog and digital) and color video printers
(analog and digital).
CAUTION: The auxiliary power outlet in the system is used to supply power for
approved peripheral devices. Do not connect other/unapproved devices to this
outlet; otherwise the rated output power may be exceeded and the system
failure may result. Maximum output power of the outlet is 240VA.
3.4.3.1 Analog Video Printer
 B/W Analog Video Printer

Mindray DC-8 EXP Specifications

General

Brand	Mindray
Model	DC-8 EXP
Category	Medical Equipment
Language	English