Mindray DC-8 EXP

Urology 9-1
9 Urology
9.1 Urology Exam Preparations
Make the following preparations before performing a urology exam:
1. Confirm that the current probe is appropriate.
2. Check if the current date of the system is correct.
3. Press <Patient>, register the patient information in [Patient Info] -> [URO] dialog box.
For more details, refer to "Exam Preparation -> Patient Information" in the Operator's Manual
[Basic Volume].
4. Switch to the correct exam mode.
9.2 Basic Urology Measurement Procedures
1. Press <Patient>, register the patient information in [Patient Info] -> [URO] dialog box.
2. Press <Measure> to enter the Application Measurements.
3. Select measurement tool in the menu (or touch screen) to start the measurement.
See table in "9.3 Urology Measurement Tools" below for measurement tools.
See section "9.4 Urology Measurement Operations" and steps in "3 General Measurement" for
measurement methods.
4. Press <Report> to view the exam report, see "9.5 Urology Exam Report" for details.