Measure Preset 2-21
Remove User-defined Item
Remove Measurement/Calculation
1. Select “User-defined” in the “Available Items”, select the desired item.
2. Click [Delete] on the right.
Remove Study
Select an user-defined study, click [<].
NOTE: 1. Adding B-Hist to the study is not supported.
2. The button of [Add Study] is available in the root directory only.
3. Click [Export XML] in the measure preset window to export the user-defined
measurement, which is used to help parsing the user-defined data by the PACS
system.
2.4.3 Report Preset
NOTE: Deleting is not supported by IVF, IMT and EM reports.
Basic procedures:
1. Select [Report] in the [Measure Preset] page.
2. Manage the report template. Available operations:
h Adding new Report Template
h Deleting Report Template
h Editing Report Template
h Setting default Report Template
3. Click [Print Blank Comment] to set whether print the comment when no
4. Continue other presets; or click [Save] on the [Setup] menu to make the settings take effect.
2.4.3.1 Creating Report Template
1. Enter [Measure Preset] -> [Report] page.
2. Click [New] to pop up the following dialog box.
To Next Page
Loading...
