Mindray DC-8 EXP - Fast ob Measurement

Measure Preset 2-23
7. Adjusting the item position.
Select an item in the [Selected Item] list, click [Move Up]/ [Move Down] to adjust the position of
the item in the list as well as in the report template.
8. Click [OK] to confirm.
2.4.3.2 Deleting Report Template
1. Enter [Measure Preset] -> [Report] page.
2. Select the template to be deleted in the list.
3. Click [OK] to delete the selected template.
4. Click [Save] in the [Report] tab sheet to confirm the settings.
2.4.3.3 Editing Report Template
1. Enter [Measure Preset] -> [Report] page.
2. Select the template to be modified in the list.
3. Select [Edit] to enter the [Measure Report Preset] dialog box.
See section “2.4.3.1 Creating Report Template” for editing the template.
4. Click [OK] in the [Report] tab sheet to confirm the settings.
2.4.3.4 Setting Default Template
1. Enter [Measure Preset] -> [Report] page.
2. Select a report template in the list.
3. Click [Default].
4. Click [Save] to confirm.
2.5 Fast OB Measurement
Enter [Preset]-[System Preset]-[Key Config] page, and assign functions to the keys for functions in
the “Measurement” list on the right side. For details, please refer to operator’s manual [Basic
Volume].