System Basics
1-9
1.5.2.2 Number Menu Items
A number menu item adjusts the value of a parameter. The parameter name is on the left of
the menu item and the value is on the right.
To operate a number menu item, turn the trackball to move the cursor onto the menu item and
then press <Set> or <Back> once or more until the value you want appears (to increase the
value, press <Set>; to decrease the value, press <Back>).
1.5.2.3 Switch Menu Items
A switch menu item switches between the “on” and “off” status of a parameter. The parameter
name is on the left of the menu item and the symbol of “√” or “×” is on the right (“√” represents
“on” and “×” represents “off”).
To operate a switch menu item, turn the trackball to move the cursor onto the menu item and
then press <Set> or <Back>.
1.5.2.4 Character Menu Items
A character menu item adjusts the value of parameter. The parameter value is described in
characters. The parameter name is on the left of the menu item and the value described in
characters is on the right.
To operate a character menu item, turn the trackball to move the cursor onto the menu item
and then press <Set> or <Back> once or more until the value you want appears.
1.5.2.5 Submenu Menu Items
A submenu menu item opens a submenu.
Menu item
Submenu
To Next Page
Loading...
Need help?
General
