File System
11-7
(1) Select the driver in [Driver:]. The Flash memory in the system is the driver C,
and the remaining driver(s) belong(s) to the USB storage device if a USB
storage device is connected.
(2) If the USB storage device is selected in the previous step, move the cursor onto
the item you want in the directory list and then press <Set> twice successively
to enter the directory. If you want to return to the parent directory, move the
cursor onto [..] and then press <Set> twice successively.
2 Select the file to be copied in the file list.
3 Click [Copy].
4 If the destination directory to which the selected file is copied is not the current one,
follow the substeps in the step 1 to select it.
5 Click [Paste] and one of the following conditions will occur:
(1) The selected file is copied to the current directory.
(2) If a file whose name is the same as the selected one exists in the current
directory, the following dialog box pops up.
If you want to replace the file in the current directory with the selected one, click
[OK]; if you do not want to replace the file in the current directory, click [Cancel]
and the selected file is not copied.
To delete a file
1 If the file to be deleted is not in the current directory, perform the following steps in the
[File/Disk Manager] dialog box.
(1) Select the driver in [Driver:]. The Flash memory in the system is the driver C,
and the remaining driver(s) belong(s) to the USB storage device if a USB
storage device is connected.
(2) If the USB storage device is selected in the previous step, move the cursor onto
the item you want in the directory list and then press <Set> twice successively
to enter the directory. If you want to return to the parent directory, move the
cursor onto [..] and then press <Set> twice successively.
2 Select the file to be deleted in the file list.
3 Click [Del] in the right part of dialog box and the following dialog box pops up.
To Next Page
Loading...
Need help?
General
