EasyManua.ls Logo

Mindray PM-7000 - Power Source Specifications

Mindray PM-7000
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Product Specifications
27
3.3 Power Source Specifications
AC mains
Input voltage 100 to 240V
Frequency 50/60Hz
Power 140VA
DC mains
Input voltage 10 to 16VDCrating-12 VDC
Power 80W
Internal battery
Number of batteries 1
Type Sealed lead-acid battery or lithium-ion battery
Time to shutdown 5 to 15min (after the first low-power alarm)
Sealed lead-acid battery
Nominal voltage 12VDC
Capacity 2.3Ah
Operating time
75 minutes typical when powered by one new fully-charged
battery (25, ECG, SpO2, NIBP measurement per 15 minutes).
Charge time About 8 h (in the running status or standby mode)
Lithium battery
Rated voltage 11.1VDC
Capacity 4.4Ah
Operating time
150 minutes typical when powered by one new fully-charged
battery (25, ECG, SpO2, NIBP measurement per 15 minutes).
Charge time About 8 h (in the running status or standby mode)

Table of Contents

Related product manuals