• It is highly recommended to use the same SpO
2
tone mode for the same
monitors in a single area to prevent issues arising from inconsistent
operation.
16.17.2 Selecting the Language
To set the user interface (UI) language, follow this procedure:
1. Select the Main Menu quick key → from the System column select Maintenance
→ input the required password → select .
2. Select the Other tab.
3. Select Language, and from the popup list, select the target language.
16.17.3 Browsing System Log
To browse the system log, follow this procedure:
1. Select the Main Menu quick key → from the System column select Maintenance
→ input the required password → select .
2. Select the Other tab.
3. Select Browse System Log → OK to enter the System Log page.
4. Select the log classifications you want to view, and then select Search. To view
logs of certain date and time, select Jump To and define the date and time.
16.17.4 Exporting System Log
To export the system log, follow this procedure:
1. Select the Main Menu quick key → from the System column select Maintenance
→ input the required password → select .
2. Select the Other tab.
3. Select Export System Log.
16.17.5 Exporting Patient Data
To export patient data, follow this procedure:
1. Connect a USB drive to the monitor’s USB port.
2. Select the Main Menu quick key → from the System column select Maintenance
→ input the required password → select .
3. Select the Other tab.
4. Select Export Patient Data.
To Next Page
Loading...
