17
Service Manual Combics
Exiting the Service Mode
t Switch the Combics 3 off and then on.
y The device is now in the normal Application mode.
If you exit the Setup menu without changing settings by confirming with the M key or
the oo soft key, the Service mode will remain active.
Press the M key again to re-open the Setup menu in the Service mode.
Operating Design | Service Mode Combics3
WP 1
WP 2
COM 1
COM 2
I/O control
Bar code
Config. printout
Operating parameters
Clock
Test I/O ports
Passwords
Maintenance
Terminal data
SQmin
Alibi Memory
To Next Page
Loading...
