5
Service Manual Combics
Safety Instructions
These Combics devices conform to relevant guidelines and standards. However, improper use
of devices can result in mechanical or electrical damage.
Repairs should only be carried out by factory-trained service technicians.
Work on Combics series devices requires special experience. For this reason, absolutely no
unauthorized repairs should be attempted!
Warning!
3
Disconnect the equipment from the power supply before starting repair work
or replacing components. Measurements, tests or repairs under voltage on
the opened unit should only be performed when an insulating transformer
or ground fault circuit interrupter is present.
Please see the operating instructions for additional safety and warning
information.
Connecting and disconnecting cables may only be done after the equipment has been
disconnected from the power. Components can be destroyed!
1. Always turn off the device via the ON/OFF key e !
2. Disconnect the power plug.
3. The appropriate repairs can now be carried out.
For more information, please refer to:
User manual CAIS/CAISL1,..2| Publication no.: WCA6007-d10051
User manual CAIS/CAISL3| Publication no.: WCA6008-d10051
Service manual for Combics Series, Publication no.: WCI5003-d04084
or Service manual for IS Series, Publication no.: WIS5020-d98021
for high-resolution weighing platforms: CAH... | CAS...
Introductory Notes
To Next Page
Loading...
Need help?
General
