Minebea Intec Combics Series - DeviceNet-Installation YDO02 C-DN (B3)

82
Service Manual Combics
DeviceNet Interface DeviceNet Interface
YDO02C-DN (Option B3)
Equipment Supplied
– Interface module
– Installation instructions (this manual)
- Cable gland
- Shielding
- Self-adhesive aluminum foil
- ferrite core
– „Fieldbus“ software interface description
– EDS file: see Minebea Intec website „minebea-intec Software download:
Select product: Fieldbus files“
Assembly
Connect interface module YDO0…-xxx (DeviceNet interface) directly to the digital board of the
scale, without configuration. For more information, please refer to the chapter entitled „Install-
ing in the Indicator“.
Operation
- MAC ID is selectable in a range from 1 to 62
- Selectable baud rates of 125k, 250k and 500k bps
- Quick connect function selectable
- Functions as a slave
- Interface electrically isolated
Note:
! !Only use cables and plugs that conform to the Profibus specification