Minebea Intec Combics Series User Manual

28
Service Manual Combics
Exiting the Service Mode
t Switch the Combics 3 off and then on.
The device is now in the normal Application mode.
If you exit the Setup menu without changing settings by confirming with the M key or
the oo soft key, the Service mode will remain active.
Press the M key again to re-open the Setup menu in the Service mode.
t Close the menu access switch.
Slide the menu access switch to the right ("closed position").
Operating Design | Service Mode Combics 3 ADC configuration

Minebea Intec Combics Series Specifications

General

Brand	Minebea Intec
Model	Combics Series
Category	Scales
Language	English