163162
CUSTOM 3
Select-Frame Film Transport - Rewinding for Multiple Exposures
(continued)
4. Press the ADJ button.
• Film will rewind back to frame 10.
5. Take the picture in the 10th frame.
• Film will advance by one frame and the frame
counter remains black indicating that frame 11
is also an exposed frame.
6. Press the ADJ button for 3 seconds.
• The select-frame film transport display
appears.
7. Turn either the front or rear control dial
and select 12.
• The display shows [+1] indicating that the film
will be advanced by 1 frame.
• Since the 12th frame has not been exposed,
the frame counter is no longer black.
8. Press the ADJ button.
• The camera will automatically advance the film
to the 12th frame.
• When rewound, subjects may not be positioned exactly as in the pre-
vious exposure, as the frame may be shifted a maximum of 1/2 of a
perforation hole.
• In the above example, a multiple exposure could also have been
taken with frame 11 before going to frame 12.
• Date imprint should be cancelled so as not to overlap the imprints.
• When custom 2-2 is selected, partial rewind is not possible after tak-
ing the last picture on the roll.
CUSTOM FUNCTIONS
To Next Page
Loading...
