179
CUSTOM 23, 24, 25
Custom 24 - Full-Auto mode of the Exposure-Mode Dial
1. When the exposure mode is set to
full-auto, changes to camera func-
tions are not possible.
• See page 26 for the full-auto settings.
2. Even after selecting full-auto,
changes are acceptable.
Custom 25 - Tasking on Exposure-mode Dial - Position 3
The exposure-mode dial has 3 memory
positions. You can choose to have position
3 used for the STF mode.
This setting uses position 3 for memory.
1. Memory mode
178
Custom 23 - AF Using Shutter-Release Button
2. AF does not work when you press the shutter-release
button partway down.
• Press the focus-area selector or the spot-AF button to activate AF.
1. AF works when you press the shutter-
release button partway down.
• AF does not work when MF is selected.
• When full auto is selected, AF works when
you press the shutter-release button partway
down, even if Custom 23-2 is selected.
To set custom functions;
1.Open control-panel door and press the CUSTOM button.
2.Turn the front control dial to select the desired custom function.
3.Turn the rear control dial to seclect the setting.
4.Press the shutter-release button partway down to enter the setings.
Refer to pages 154-157 for additional information.
Continued on next page
• When Custom 24-2 is selected, “Full Auto” will not appear in the dis-
play.
• Auto-flash is not possible.
• Flash always fires if the built-in flash is up, or the accessory flash is
on.
• When the main switch is turned off, the additional changes will be
cancelled.
• Custom 1, 20, 21, 22, and 23 settings are effective.
CUSTOM FUNCTIONS
To Next Page
Loading...
Need help?
General
