Command Mode - Configuration & Operation
28
CONFIGURATION MENU/6. AFTER HOURS TIME CONFIGURATION
After hours duration for which the panel is in after hours mode can be entered in the following three ways
1. For weekdays the user is prompted to enter the start time and the end time for which the panel is in off-hours
mode.
2. For weekends (Saturday and Sunday) the user is prompted to enter the start time and the end time for which
the panel is in off-hours mode.
3. For holidays, a list of holidays is show, the user can press RIGHT key to add and LEFT key to delete the
holidays or can press ENTER to edit the holiday.
For example to add a holiday for July 4th for every year, set the start date leave the year as YYYY
Set the end date which is the next day if the holiday is for one day only, leave the year as YYYY
To add a holiday for May 1st for 2006 only, set the date including the year
Set the end date which is one day after the holiday including the year
Enable the every year option, so the holiday is applied to every year
Daily Compensation
Seconds :00
Afthrs config
1. Set night time
2. Set weekends
3. Set holidays
Night time start
Time : 06:00 PM
Night time end
Time : 08:59 AM
Weekend start
Time : 06:00 PM
Weekend end
Time : 08:59 AM
Holidays
JAN 01, YYYY
JUL 01, YYYY
DEC 25, YYYY
Holiday start
Date : Jul 04, YYYY
Holiday end
Date : Jul 05, YYYY
Holiday start
Date : May 01, 2006
Holiday end
Date : May 02, 2006
To Next Page
Loading...
Need help?
General
