Mitel 5340 - Page 114

Mitel IP Phone User Reference Guide Release 4.1
112
Feature Description
Default
Label
Details Status
Monitor
Phone
(LED)
Assign the Monitor Phone option to a
memory key to monitor another user’s
phone to see when their phone is active.
Any key that is assigned to monitor
another phone also acts as a speed-dial
to that phone.
Note:
Monitor Phone does not allow you to
pick-up calls on another user’s line.
Monitor phone
*** (extension
number of
user)
Select the name of the
user this key will be
monitoring.
Note:
The Monitor phone
option is not displayed
if you are not a
member of a monitor
group.
N/A
One
Touch
Speed
Dial
Assign the One Touch Speed Dial option
to a memory key to dial a user defined
phone number by pressing the
associated memory key.
Type the phone
number that you want
to dial to enable the
One Touch Speed Dial
option.
N/A
Page Assign the Page option to a memory key
so that you can send a page to all of the
phones at your site. The page is
broadcast through the speaker of each
available phone.
Page None N/A
Park/
Retrieve
Assign the Park/Retrieve option to a
memory key to put a call on hold at a
park location such that it can be
retrieved from any other phone at your
business that has a memory key
configured with the Park/Retrieve option.
When you are on an active call,
selecting a memory key programmed
Park/Retrieve None N/A