Mitel 5340 - Page 42

Mitel IP Phone User Reference Guide Release 4.1
40
Forwarding your 5224/5324 phone
You can forward your phone by using any of the forwarding features. In each
case, you must program a memory key with the appropriate feature. See
“Program memory keys“ on page 104.
You can forward your phone by following the procedure described in the
following sections:
• Forward your 5224/5324 phone to auto attendant on page 40
• Forward your 5224/5324 phone to co-worker on page 40
• Forward your 5224/5324 phone to coverage on page 40
• Forward your 5224/5324 phone to number on page 41
• Forward your 5224/5324 phone to prompt on page 41
Forward your 5224/5324 phone to auto attendant
Using Forward to Auto Attendant, you can send all incoming calls to a selected
auto attendant. Press the Forward to AA key once to turn the feature on. Press
the key a second time to turn the feature off. The LED on the programmed key
indicates when the phone is being forwarded.
To use this feature, you must have a memory key programmed with Forward to
AA.
NOTE: If you have this feature turned on when you log out of your phone all your
calls will be forwarded to the auto attendant.
Forward your 5224/5324 phone to co-worker
Using Forward to Co-worker, you can send all incoming calls to a selected co-
worker. Press the Forward to Co-worker key once to turn the feature on. Press
the key a second time to turn the feature off. The LED on the programmed key
indicates when the phone is being forwarded.
To use this feature, you must have a memory key programmed with Forward to
Co-worker.
NOTE: If you have this feature turned on when you log out of your phone all your
calls will be forwarded to your co-worker.
Forward your 5224/5324 phone to coverage
Using Forward to Coverage, you can send all incoming calls to the option you
selected for your call coverage, e.g., auto attendant, voice mail, another number.
(See “Call Coverage” on page 115). Press the Forward to Coverage key once
to turn the feature on. Press the key a second time to turn the feature off. The
LED on the programmed key indicates when the phone is being forwarded.
To use this feature, you must have a memory key programmed with Forward to
Coverage.
NOTE: If you have this feature turned on when you log out of your phone all your
calls will be forwarded to coverage.