Mitel 6869 SIP - Page 14

14 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Keys, display, and menu guidance
10 Line keys L1 to L2 with
LED
Mitel 6867 SIP: 2 line keys. A total of 9 lines are
available.
Mitel 6869 SIP: 2 line keys. A total of 12 lines are
available.
• Seizing a line.
• Answering a call.
• Brokering with simultaneous configuration of
multiple line keys.
11 Loudspeaker/headset
key with LED
• Activating/deactivating open listening.
• Activating/deactivating handset microphone.
• Activating/deactivating headset microphone.
12 Hash key Entering # or special characters.
13 Digit keys 1-9 Entering characters and digits.
14 Asterisk key Entering * or space.
15 Volume keys Adjusting volume.
16 Mute key Muting the microphone so that the caller cannot
hear you (the LED beside the key turns on when
the microphone is on mute).
17 Settings key Calling up a local settings menu (options list).
18 Hold key • Holding an active call.
• Taking back a call from hold.
19 End key • Ending a call.
• Back to display in idle state.
• Exiting editor without changes.
20 Bottom softkeys S1-S18
(Mitel 6867 SIP)
Four freely configurable keys on which a total of
18 functions or call numbers can be configured.
Default functions are automatically set by the
MiVoice Office 400 communication system. You
can configure additional functions or change the
default functions. If more than four functions or
call numbers are configured, the fourth key is
used to switch levels. Every fourth function or call
number is accessible at the next level.
No
.
Key Description