Phoning
Mitel 6873 SIP 41
eud-1744/1.4 – R5.0 HF2 – 10.2017
Making a conference call
You want to make a conference call.
A conference call allows you to connect three call parties. From a confer-
ence call, you can initiate an enquiry call to someone else. You can broker
between the conference participants and the enquiry call party. Depending
on the system configuration, a conference call can consist of up to 6 con-
ference participants. You can hold a conference call with internal and
external users.
Note: If you have a user account for the Self Service Portal, you can create con-
ference rooms there (see chapter "MiVoice Office 400 Self Service Portal",
page 9).
Transferring a call
You want to put your call partner through to someone else.
With the call transfer function you can connect your call partner with some-
one else. You can connect internal and external users with one another.
You can transfer the call with or without prior notice.
Setting up a conference (you are connected):
1. Press the Conference softkey.
2. Enter the phone number of the second conference call party.
3. Press the Dial softkey.
➔The conference party answers the call.
4. Press the Conference softkey.
Notes: • You can also set up a conference by pressing the busy lamp field keys to
which you have saved the call party.
• You can change the procedure by first starting an enquiry call before you set
up a conference.
Leaving a conference call:
Put the handset on-hook or press the End key.
➔The other conference parties remain in the call.
Menu Description
Call transfer with prior
notice
You only transfer the call after you have first talked to the
second call party yourself.
Call transfer without
prior notice
Without talking to the second call party, you transfer the
call to them by hanging up the handset immediately after
dialling the call number.
To Next Page
Loading...
Need help?
General
