52 Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Phoning
Acknowledging an appointment call
You can set a call to remind you about an appointment, for example.
Appointment call is displayed as soon as an appointment call is received.
Without acknowledgement, the appointment call will ring for 1 minute.
The following options are available: You have to enter or change the time
in the Self Service Portal.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 92
).
Notes: • If you activated forwarding, the appointment call is not forwarded.
• If you are in call, the appointment call is made as soon as you end the
call.
Activating the phone lock:
Press the function key for Phone lock on/off.
➔The phone is locked and can only be unlocked using your PIN. is displayed
in the status line.
Deactivate the phone lock:
1. Press the function key for Phone lock on/off.
2. Enter the PIN and confirm with the Enter softkey.
3. Confirm the security prompt with the Yes softkey.
Note: Use the following function codes (see also Features Overview Mitel
415/430/470 user guide on the Mitel
DocFinder), to activate or deactivate the
phone lock for all phones within the one number user concept (see "One num-
ber user concept", page 8):
•
Activating the phone l
ock: Enter the function code *33*
<PIN>
#
•
Deactivate the
phone lock: Enter t
he function code
#33*
<PIN>
#
Menu Description
Single appointment
call on/off
Activate appointment call on a one-off basis.
Repeat appointment
call on/off
Activate appointment call permanently
To Next Page
Loading...
Need help?
General
