60 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Notes: • You can only log in to a phone if no other user has yet logged in to that
phone for free seating purposes.
• You can only log on once to a Free Seating phone. The moment you log
in to another free seating phone, you are automatically logged off the
original phone.
Logging off a free seating phone:
To free up a phone, you need to log off again. To ensure a phone is not
blocked for other users if you forget to log off, your system administrator
can set up a log off process with an automatic time limit:
• After certain time after log in (e.g. six hours and 30 minutes).
• At a certain time (e.g. 6:30 p.m.)
Notes: • If no user is currently logged in a free seating phone, possibly only
emergency calls are allowed.
• As long as you do not have your own phone or are not logged on to a
Free Seating phone, your caller will obtain either the busy signal or be
forwarded to a preconfigured destination, depending on the system
configuration.
• If your phone is activated as free seating phone, the configuration of
keys with interchangeable key caps is locked (see chapter "Inter-
changeable key caps", page 99).
• The call list display type Picture ID (see chapter "Editing options for the
call list", page 72) is not available for free seating phones.
Log in free seating:
Press the Free Seating: Log in/out softkey.
Enter phone number and PIN and confirm with the OK softkey.
➔You are now logged in and can use the free seating phone with your personal
settings.
Note: The default PIN setting ‘0000’ is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 90
).
To Next Page
Loading...
