EasyManua.ls Logo

Mitel 6869 SIP - Page 63

Mitel 6869 SIP
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Phoning
Mitel 6867 SIP / Mitel 6869 SIP 63
eud-1664/2.0 – R6.0 – 06.2018
Call forw. (CFU) to VM
on/off
Incoming calls are automatically forwarded to voice
mail.
Call forw. if busy (CFB) to
user on/off
If you are busy, incoming calls will be forwarded to
specific destination (user).
Call forw. if busy (CFB) to
VM on/off
If you are busy, incoming calls will be forwarded to
specific destination (voice mail).
Call forw. on no reply
(CFNR) to user on/off
Incoming calls are forwarded to another destination
(user).
Call forw. on no reply
(CFNR) to VM on/off
Incoming calls are forwarded to another destination
(voice mail).
Call forwarding menu Direct access to the system menu Forwarding (see
chapter "Call forwarding", page 70
).
Call forwarding protection
on/off
Call forwarding to your phone is not allowed.
Call list: Menu Direct access to the system menu Call list.
Call list: Answered Call list for answered calls.
Call list: Redial Call list for dialed call numbers.
Call list: Unanswered Call list for unanswered calls.
Call recording: Start/stop Record a call. The recordings are stored in your indi-
vidual e-mail inbox only (see chapter "Recording a
call", page 51). Contact your system administrator to
configure this function on your phone.
Call transfer Transfer a call to another user with or without prior
notice.
Control output on/off You can control external electric equipment or instal-
lations using control outputs. For example you can
use your phone to open and close electric gates or to
switch the lights on or off throughout a building.
Discreet ring on/off When this function is on, the phone only rings once.
For further information, please see "Activating dis-
creet ring", page 53.
Do not disturb (busy)
on/off
Your phone does not ring and is set to busy for
incoming calls.
Do not disturb (forwarding)
on/off
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically for-
warded to a destination that has been configured by
your system administrator.
Function Description

Related product manuals