Mitel 6869 SIP - Page 64

64 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Empty The key assignment is configured with an empty
function. The key serves as a place-holder. If config-
uration on any key is deleted, the configurations on
the subsequent keys shift their position. This can be
avoided if instead of deleting the configuration, you
configure the Empty function on that key.
Free configurable You can use function commands to define a function
to suit your personal requirements. A function can
consist of one or more function commands, function
codes, and the phone number. You can either carry
out a function directly or store it under a key (see
chapter "Overview of available functions", page 62
).
Free seating: Log in/log
out
Log into/out of a free seating phone (see chapter
"Free seating", page 59
).
Hide number on/off Permanently prevents your number from being dis-
played to the caller (see chapter "Hide number",
page 44).
Hide number per call Prevents your number from being displayed to the
caller once (see chapter "Hide number", page 44
).
Home Alone on/off If calls to a user group can only be answered by one
user, the user in question can activate Home Alone
on the user group. Then if the user is already in a call,
all subsequent internal or external calls to the user
group obtain a busy tone.
Intrusion This function allows you to intrude on a call of a busy
user with notification (see chapter "Activate/reply to
intrusion", page 54).
Meeting centre This function enables access to the MiCollab Audio,
Web, and Video conferencing from your SIP phones.
Contact your system administrator to know more
about the configuration of MiCollab Meeting Centre
function on your phone.
Message This function triggers a call back or plays a voice
mail. If the message key is pressed, a call is triggered
or the guest is connected to the voice mail system
and can listen to the voice message. The function
code for the Message function is *#38.
Function Description