EasyManua.ls Logo

Mitel 6940 SIP - Page 60

Mitel 6940 SIP
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60 Mitel 6940 SIP
eud-1765/2.0 – R6.0 – 06.2018
Phoning
Call recording: Start/stop Record a call. The recordings are stored in your indi-
vidual e-mail inbox only (see chapter "Recording a
call", page 48). Contact your system administrator to
configure this function on your phone.
Call transfer Transfer a call to another user with or without prior
notice.
Control output on/off You can control external electric equipment or instal-
lations using control outputs. For example you can
use your phone to open and close electric gates or to
switch the lights on or off throughout a building.
Discreet ring on/off When this function is on, the phone only rings once.
For further information, please see "Activating dis-
creet ring", page 49.
Do not disturb (busy)
on/off
Your phone does not ring and is set to busy for
incoming calls.
Do not disturb (forwarding)
on/off
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically for-
warded to a destination that has been configured by
your system administrator.
Empty The key assignment is configured with an empty
function. The key serves as a place-holder. If config-
uration on any key is deleted, the configurations on
the subsequent keys shift their position. This can be
avoided if instead of deleting the configuration, you
configure the Empty function on that key.
Free configurable You can use function commands to define a function
to suit your personal requirements. A function can
consist of one or more function commands, function
codes, and the phone number. You can either carry
out a function directly or store it under a key (see
chapter "Overview of available functions", page 58
).
Free seating: Log in/log
out
Log into/out of a free seating phone (see chapter
"Free seating", page 56
).
Hide number on/off Permanently prevents your number from being dis-
played to the caller (see chapter "Hide number",
page 41).
Hide number per call Prevents your number from being displayed to the
caller once (see chapter "Hide number", page 41
).
Function Description

Related product manuals