Using the T/B
Unless the controller mode sets "MANUAL", operations other than specific operations (current position
display on JOG screen, changing of override, monitoring of input/output, error history) cannot be carried
out from the T/B.
Function key
There is the menu displayed on the lowest stage of the screen in the white character. These are assigned
to [F1], [F2], [F3], and [F4] key sequentially from the left. The menu currently displayed by pressing the
corresponding function key can be selected.
And, if "=>" is displayed at the right end of the menu, it is shown that there is still the menu other than the
current display, and whenever it presses the [FUNCTION] key, the display menu changes.
To Next Page
Loading...
