3Explanation of operation methods
3-19
Move the cursor to character"B", and input "M" and "Y" after pressing and deleting the [CLEAR] key.
If the long pushing [CLEAR] key, all the data in the parenthesis can be deleted.
(3) Selecting a menu
A menu can be selected with either of the following two methods.
*Press the number key for the item to be selected.
*Move the cursor to the item to be selected, and press the [EXE] key.
How to select the Management/edit screen ("1. FILE/EDIT") from the <menu> screen with each method is
shown below.
1) Set the controller mode to "MANUAL".
2) Set the T/B to "ENABLE".
3) Press one of the keys (example, [EXE] key)
while the <TITLE> screen is displayed.
The <MENU> screen will appear.
*Press the number key method
1) Press the [1] key. The <FILE/EDIT> screen
will appear.
*Use the arrow key method
1) Press the arrow keys and move the cursor to
"1. FILE/EDIT", and then press the [EXE] key.
The <FILE/EDIT> screen will appear.
The same operations can be used on the other
menu screens.
<NEW PROGRAM>
PROGRAM NAME
( )
CLOSE
ABC
Correction of the input character [←] [CLEAR] [MNO] [WXYZ] [WXYZ] [WXYZ]
<NEW PROGRAM>
PROGRAM NAME
(
ABY )
CLOSE
ABC
MELFA CR75x-D Ver. S3
RH-3FH5515-D
COPYRIGHT (C) 2011 MITSUBISHI ELEC
TRIC CORPORATION ALL RIGHTS RESE
RVED
Display the MENU screen from the title screen.
Down：
ENABLE
*Lighting
Up ：
DISABLE
Rear of T/B
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT. 6.ENHANCED
CLOSE
123
<FILE/EDIT> 1/20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
COPY
123
POSI.
EDIT
NEW
⇒
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT. 6.ENHANCED
CLOSE
123
Move the cursor - set [ ↑ ] [ ↓ ] [←] [→] + EXE
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT. 6.ENHANCED
CLOSE
123
<FILE/EDIT> 1/20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
COPY
123
POSI.
EDIT
NEW
⇒
To Next Page
Loading...
