3Explanation of operation methods
Operating the program control screen 3-63
(2) Copying programs
1) Select the copy menu
Press the function key corresponding to the "COPY" by program list display. Display the copy screen.
2) Specification and execution of the program to copy.
In the parenthesis of the copied source, the program name beforehand selected by the program list
screen is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow
key.
Input the program name copied in the parenthesis of the copy destination, and press the [EXE] key.
<PROGRAM COPY>
SRC.NAME ( 1 )
DSR.NAME ( )
CLOSE
123
<FILE/EDIT> 1/20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
COPY
123
POSI.
EDIT
NEW
⇒
<PROGRAM COPY>
SRC.NAME ( 1 )
DSR.NAME ( 21 )
CLOSE
123
<FILE/EDIT> 1/ 20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
EDIT POSI.
NEW
COPY
123 ⇒
Protected information is not copied
The program protection information and variable protection information is not copied with the copy opera-
tion.
Reset this information as necessary.
To Next Page
Loading...
