3Explanation of operation methods
Programming 3-39
Select and correct the line.
[ ↑ ] by the [ ↓ ] key, the cursor can be moved to step 5, and the function key corresponding to "EDIT" can
also be pressed and corrected to it.
Cancel correction.
Correction can be canceled if the function key which corresponded for "CLOSE" is pressed in the middle of
correction.
Correction of the character.
Move the cursor to up to the mistaken character, and input the correct character after pressing the [CLEAR]
key and deleting leftward.
If the program is corrected.
If the program is corrected, certainly save. ?Function key [F4 which correspond for "CLOSE" are pushed, or
push the [ENABLE] switch on the back of T/B, and disable T/B.?Please check that it has been correctly cor-
rected by step operation about the details.
To Next Page
Loading...
