Mitsubishi Electric MELSEC-FX3S Series - Page 36

A-10
2 Description of Analog Products
2.1 Types of Analog Products
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
Common Items
4. FX3UC Series PLC
• Connect the special function block(s) to the right side of the FX3UC Series PLC.
• In some cases, FX
2NC-CNV-IF or FX3UC-1PS-5V may be needed for connection.
• Up to 8
*1
special function blocks can be connected.
Select either FX
3UC-1PS-5V or FX2NC-CNV-IF considering the current components consumption.
→ For a detailed description of the system configuration,
refer to the FX
3UC Series User’s Manual - Hardware Edition.
*1. Up to 7 special function units/blocks can be connected to the FX
3UC-32MT-LT(-2) PLC.
Up to 8
*1
special function units/blocks can be connected (excluding the special adapters).
PLC
FX3UC-1PS-5V
or
FX
2NC-CNV-IF
Analog special function block
for FX
3U/FX2N/FX0N
Analog special function block
for FX
3UC /FX 2NC