146
3.11.1 Monitor condition setting Note 3.2
This setting is used to monitor data in the CPU module under a specified condition.
(1) Setting method
There are two kinds of monitor condition setting.
• Monitor execution condition setting
• Monitor stop condition setting
For the setting method, refer to the following.
Operating manual for the programming tool used
Note 3.2
The Q00UJCPU, Q00UCPU, and Q01UCPU do not support this function. Before executing the function with the
Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q13UDHCPU, or Q26UDHCPU, check the versions of the CPU
module and programming tool used. ( Page 465, Appendix 2)
To Next Page
Loading...
