444
Appendix 1.2.6 Program
File names and execution types (execution conditions) are set for each program when two or more programs are
written to the CPU module.
*1 Available for local devices only. When using the file usability setting, check the versions of the CPU module and
programming tool. ( Page 465, Appendix 2) The setting is not available for the Q00UJCPU.
Item
Parameter
No.
Description Setting range Default Reference
Program setting
7000
H
When writing two or more programs to
the CPU module, set a file name and
execution type (execution condition) of
each program.
Also, set a fixed scan interval
(execution interval of the fixed scan
execution type program).
• Program Name
• Execute Type (fixed scan interval
when the fixed scan execution is
selected)
• File Usability Setting
*1
Blank
Page 88,
Section 2.10
To Next Page
Loading...
