Mitsubishi Electric MELSEC-Q00U(J)CPU

443
APPENDICES
A
Appendix 1 Parameters Appendix 1.2 PLC parameters
Appendix 1.2.5 Boot file
Parameters required for a boot from a memory card are set.
Item
Parameter
No.
Description Setting range Default Reference
Boot Option
Clear Program
Memory
7000
H
Select whether to clear the
program memory at the time of
boot.
Selected/deselected Deselected
Page 104,
Section 2.11
Boot File Setting
Set the type and data name of the
boot file, and transfer source drive
for boot operation.
Type, Data Name, and Transfer
from (The transfer target drive
(Transfer to) is automatically set
in the program memory.)
Blank