27
CHAPTER 1 BASIC PROCEDURE FOR PROGRAMMING
1
1.2 Creating a Project
1.2 Creating a Project
A project is a set of information, such as programs and parameters, which is necessary to operate a programmable
controller.
The following two projects are available.
• Simple project
• Structured project
Create a new project using GX Works2.
[Project] [New...]
When perform communication between a programming tool and a CPU module through GOT or a network module, check
the PLC type because the modules could be connected with incorrect model names. If the modules are connected with
incorrect model names, data may not be written or read properly.
Item Description
Project Type Select a type of project to create. In this chapter, "Simple Project" is selected.
Use Label Select this checkbox when using a label for programming. In this chapter, this is not selected.
PLC Series Select a series of the CPU module to use in the project. In this chapter, "QCPU (Q mode)" is selected.
PLC Type Select a type of the CPU module (CPU module model) to use in the project. In this chapter, "Q03UD" is selected.
Language Select a language of the program data to use for the new project. In this chapter, "Ladder" is selected.
To Next Page
Loading...
