Mitsubishi Electric MELSEC-Q00U(J)CPU - 5.4 Character String ( )

417
CHAPTER 5 CONSTANTS
5
5.4 Character String (" ")
5.4 Character String (" ")
The character string is a device used to specify a character string in sequence program.
Characters enclosed in quotation marks (example: "ABCD1234") are specified.
(1) Available characters
The shift JIS code can be used for character strings.
The CPU module distinguishes between upper and lower case characters.
(2) Number of specified characters
A string from the specified character to the NUL code (00
H
) is one unit.
Note that, however, up to 32 characters can be specified for an instruction using a character string, such as
$MOV.