304
(1) Settings
Set the following network parameters using GX Works2.
• Network type
• Network range assignment
• Refresh parameters
For details, refer to the following.
CC-Link IE Controller Network Reference Manual
(2) Precautions
(a) Boot operation
If the parameters for the send points extension function are stored in a memory card or SD memory card and
the parameters are transferred to a CPU module that does not support this function, "LINK PARA. ERROR"
(error code: 3102) occurs.
(b) Restoring backup data from a memory card, SD memory card, or GOT
If the parameters for the send points extension function backed up in a memory card, SD memory card, or GOT
are restored to a CPU module that does not support this function, "LINK PARA. ERROR" (error code: 3102)
occurs.
To Next Page
Loading...
