Mitsubishi Electric MELSEC-Q00U(J)CPU

318
(b) Instruction
When the following operations are performed, operation histories are saved.
• Writing to device
*1 This operation is saved when "Save device write operation" is enabled in the PLC RAS tab of the PLC parameter.
• Writing (transferring) of file
• Clock setting
(c) File transfer function (FTP server)
When the following operations are performed, operation histories are saved.
• Writing to device
• Writing to file
Classification Instruction
Writing to device
*1
Writing data to the programmable controller in another station
SP.WRITE
JP/GP.WRITE
JP/GP.SWRITE
J(P).ZNWR
GP.RIWT
Writing device data from another CPU module D(P).DDWR
Writing to a notification device for reading/writing data of programmable
controller in another station (with the read/write notification)
JP/GP.SWRITE
JP/GP.SREAD
Clearing device Remote RUN when clearing is specified in the clear mode
Z(P).RRUN
J(P)/G(P).REQ
Classification Instruction
Writing or transferring a file by FTP client SP.FTPPUT
Classification Instruction
Clock data writing DATEWR
Writing data to the clock of the programmable controller in another station
J(P)/G(P).REQ
Z(P).RTMWR
Classification Operation Command
Clearing device Remote RUN when clearing is specified in the clear mode quote
Classification Operation Command
Writing to file
Creating new file
put
mput
Deleting file
delete
mdelete
File change Modifying file information rename