Mitsubishi Electric MELSEC-Q00U(J)CPU

383
CHAPTER 4 DEVICES
4
4.5 Module Access Devices 4.5.1 Intelligent function module device
(2) Processing speed
The processing speed of the intelligent function module device is as follows:
• The processing speed of writing or reading using the intelligent function module device is slightly higher
compared with the case of using the FROM or TO instruction.
"MOV U2\G11 D0"
• When reading from the buffer memory of an intelligent function module and another processing with one
instruction, totalize the processing speed of the FROM or TO instruction and the other instruction.
"+ U2\G11 D0 D10"
Instead of using the intelligent function module device in the sequence program twice or more to write or read buffer memory
data, using the FROM or TO instruction once in one place can increase the processing speed.
For buffer memory addresses and applications, refer to the manual for each intelligent function module used. For
the FROM and TO instructions, refer to the following.
MELSEC-Q/L Programming Manual (Common Instruction)
Ex.
Ex.
Writes data to a device
such as data register (D)
Writes data once in the program
[Writing data using the intelligent function module device multiple times]
[Writing data using the TO instruction once in the program]