11 TROUBLESHOOTING
11.6 Error Code List
117
11
11.6 Error Code List
I/O module specific error
I/O module specific error codes are as follows.
CC-Link IE Field Network Basic related error
For CC-Link IE Field Network Basic related error codes, refer to the manual for respective series.
MELSEC iQ-R CPU Module User's Manual (Application)
MELSEC iQ-F FX5 User's Manual (Application)
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
MELIPC MI5000 Series User's Manual (Application)
Error code Error type Error name Description and cause Action
0010H Major error Hardware error Module hardware error Power off and on the module power supply.
If this error persists, the module may be in failure.
Please consult your local Mitsubishi representative.
0101H Moderate
error
IP address setting
switch setting out of
range error
An IP address setting switch is set
outside the range between 0 and
254.
Power off the module power supply, set the IP address
setting switch in the range of 0 to 254, and then power on the
module power supply again.
0201H Minor error IP address setting
switch changed error
An IP address setting switch has
been changed with the module
power supply on.
Return the IP address setting switch to the previous setting.
0202H Minor error Function setting
switch 1 to 3 changed
error
The function setting switch 1 to 3
has been changed with the
module power supply on.
Return the function setting switch 1 to 3 to the previous
setting.
0203H Minor error Function setting
switch 4 changed
error
The function setting switch 4 has
been changed with the module
power supply on.
Return the function setting switch 4 to the previous setting.
To Next Page
Loading...
Need help?
General
