118
APPX
Appendix 1 Remote I/O Signal
APPENDICES
Appendix 1 Remote I/O Signal
List of remote I/O signals
This section lists I/O signals for a master station.
Remote input (RX) indicates the input signal from the I/O module to the master station.
Remote output (RY) indicates the output signal from the master station to the I/O module.
Do not use any "Use prohibited" remote I/O signals. Doing so may result in an accident due to an incorrect
output or malfunction.
Input module
■16-point module
Remote input Remote output
Signal direction: Input module Master station Signal direction: Master station Input module
Device number Description Device number Description
RX0 External input signal X0 RY0 Use prohibited
RX1 External input signal X1 RY1
RX2 External input signal X2 RY2
RX3 External input signal X3 RY3
RX4 External input signal X4 RY4
RX5 External input signal X5 RY5
RX6 External input signal X6 RY6
RX7 External input signal X7 RY7
RX8 External input signal X8 RY8
RX9 External input signal X9 RY9
RXA External input signal XA RYA
RXB External input signal XB RYB
RXC External input signal XC RYC
RXD External input signal XD RYD
RXE External input signal XE RYE
RXF External input signal XF RYF
RX10 Use prohibited RY10
RX3F RY3F
To Next Page
Loading...
