Mitsubishi Electric NZ2MFB2-16A - Program Example

9 PROGRAMMING
9.2 Program Example
95
9
9.2 Program Example
System configuration
The setting procedure assumes the use of GX Works3.
(1) Master station
• Power supply module: R62P
• CPU module: R04CPU
(2) Slave station (station number: 1, IP address setting switch: 1)
• I/O combined module: NZ2MFB1-32DT
(3) X0 input signal (pressing button)
(4) Y10 output signal (lamp)
(1)
(2)
(3) (4)