126
APPX
Appendix 3 Setting IP Addresses and Subnet Masks
• Set the IP address in the range between 0.0.0.1 and 223.255.255.254.
• Set the subnet mask in the range between 192.0.0.0 and 255.255.255.252.
• If the IP address setting switch is not 0, the setting is not reflected.
• Settings other than the IP address and subnet mask are not reflected.
• If "Communication Setting Reflection of Slave Station" is executed to an I/O module where the IP address
setting switch is set to a value other than 0, an error message is displayed.
• If the subnet mask is not set, only the setting of IP address is reflected.
To Next Page
Loading...
