Mitsubishi Electric NZ2MFB2-16A - Page 131

APPX
Appendix 4 Diagnostic Information of Slave Station
129
A
Detailed module information (upper)
The function setting status of I/O module is stored.
■bit0 to bit2 (input response time setting status)
The setting status of input response time setting is stored. The input response time setting is determined depending on the
status of the function setting switch 1 to 3 when the module power supply is on.
Stored value Input response time
b2 b1 b0
00010ms
0010ms
0100.2ms
0111.0ms
1001.5ms
1015ms
11020ms
11170ms
: Performed by I/O module
(1) The input response time setting is determined depending on the status of the function setting switch 1 to 3 when the module power supply is on.
(2) For input response time setting status, the setting status of input response time is stored instead of the status of function setting switch 1 to 3.
(3) The input response time setting is not changed even if the function setting switch 1 to 3 is changed during operation.
OFF
ON
OFF
OFF
ON
ON
(1)
(3)
(2)
- 011: 1.0ms
000 011
Function setting switch 3 status
Function setting switch 2 status
Module power supply
Function setting switch 1 status
Input response time setting
status(bit0 to bit2)
Input response time setting