10 - 14
(8) Low speed program operation time
The low speed program operation time is the sum of processing times of the instructions used in the low speed
execution type program to be executed by the CPU module.
For the processing time required for each instruction, refer to the following.
MELSEC-Q/L Programming Manual (Common Instruction)
(9) Common processing time
The CPU module performs common processing by the system. The common processing time shown in
Table10.15 is required.
Table10.15 Common processing time
CPU module Processing time
Q00JCPU 0.66ms
Q00CPU 0.60ms
Q01CPU 0.52ms
Q02CPU 0.40ms
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
0.16ms
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU 0.5ms
To Next Page
Loading...
