Mitsubishi FREQROL-U100

eeling length
lze for terminal block
Main circuit (Note
1) Controlcircuit
ze
Solid wire: ,$0.3 to ~1.8mm Solid wire: <fl 0.4to ¢l1.0 mm
Strand
:
0.08 to 2.5 mnl
Strand
: 0.3 to 0.75mnl
ling length
5 to 6mm 8tol0mm
S terminal is standard feature for the terminal blocks excluding
ndinq terminal.
d with rod terminals" or with only the wire instead of using crimp
s.
ing strands, make sure that the strands do not loosen to avoid
ircuit. )
mp terminal for only the grounding terminal.
lzes shownaboveare available. but a 2 m~ wire is recommended
f reliability,
-13-
Screwles
the grou
Ccnnecte
term ina I
(When us
a short c
Use a cri
Wire si
Wire sheath pee
(Note 1)
The wire s
in terms 0
• Wire size and p
• Applicable wire
s