Mitsubishi FREQROL-U100

(3) Trial run
LhWARNING
.& Check all parameters. and ensure that the machine will not be
dameged by sudden start-up.
(4) Operation
LhWARNING
.& When retry function is selected the inverter will try to restart
the machine up to 10 times over a 1 hour period. Ensure
operator safety with other devices.
.& The stop key can only be used at all times to stop the inverter
when a
parameter has been set. therefore use an external
emergency stop button. Switch off start signal when resetting
the inverter. failure to do so may start the motor immediately
after reset.
.& The Electronic motor thermal protection does not guarantee
to prevent motor burn out.
A-6