Mitsubishi FREQROL-U100

• Stop key function IZID
When "stop key" is pressed in external operation mode, motor is decelerated to
a stop.
Setting value Stop key function
o The stop key only functions in PU op or combined mode.
14 When stop key is pressed in any operation mode, motor stops.
Note 1) To restart after 'stop key stopping" in ext mode.
CD Turn off the start signal (STP/STR) after the motor has stopped.
@ Press the 'SET" key.
@ Turn on the start signal (STF/STR).
Note 2) When motor is stoped by using the stop key in external operation mode. "E O' is
displyed.
-33-