Mitsubishi FREQROL-U100

Operator Safety
1. Electric shock prevention
it WARNING HIGH VOLTAGE
&. Do not remove th,e front cover while there is power supplied to
the inverter, there are high voltage terminals which can be
accessed. Please check
the wiring when the inverter is not
powered.
&. There are high voltage capacitors in the main circuit which
remain
charged after the inverter has been turned off, wait 10
minutes after the Power Lamp has gone out and check for no
residual voltage
actoss terminals "P!+" and <:: ("P" and
"N") before touching wires.
&. Use good earthing. Earth the inverter before wiring the Power
circuits and control circuits.
&. Do not operate with wet hands.
&. Do not damage, cut, trap, or degrade the cables.
A-2