Mitsubishi FREQROL-U100

• Acceleration time (I] • Deceleration time [[]
• Acceleration/deceleration reference frequency ~
Pr.7 and 8 can be set between 0.1 and 999 seconds.
Acceleration time is the time (inclination) taken for acceleration to the frequency
(fm) set in acc./dec. reference frequency Pr.20.
If the acceleration/deceleration time is set to 0, the time will be 0.04 seconds.
5.0 sec.
5.0 sec.
[Factory setting]
Acceleration time
Deceleration time
Acceleration/deceleration
reference frequency·········· 60Hz
Deceleration
time
W
Acceleration
time [II
'1'--1---++....1- Time
-27-